GPM Aluminum 6061-T6 Rear L-Shape Piggy Back(Built- In Piston Spring)Adj.Spring Dampers 143mm - 2PC Set f. Sledge
48.90 €
Versandfertig in 1-2 Werktagen
.
GPM Aluminum 6061-T6 Rear L-Shape Piggy Back (Built-In Piston Spring) Adjustable Spring Dampers 143mm - 2PC Set for Traxxas Sledge
GPM Aluminum 6061-T6 Rear L-Shape Piggy Back (Built-In Piston Spring) Adjustable Spring Dampers 143mm - 2PC Set for Traxxas Sledge
Packaging Includes: Damper-2pcs
Original Name / Part No: 9661
Part location: Rear dampers
Does this product replace a specific part or function? Yes
Product major functions & usage: Reduce the friction and absorb the pressure during driving so that the car can be more balanced.
Is this part adjustable? If yes … how and why/purpose? How: Adjust the top spring retainer and red screw at the bottom of negative pressure oil cylinder. Purpose: To adjust the hardness of the spring damper.
Major advantages of upgrading to this product: (1). Made with a quality light weight high tensile strength aluminum 6061-T6 powerful use,Spring wire diameter 2.0mm is consistent with the original. (2). The damper shaft has thickened from 5.0mm to 6.0mm and smoothly polished to avoid bending. (3.) Aluminum body with shock-absorb cap to seal tightly and avoid leaking. (4). L shape piggy back with built-in piston spring can adjust the rebound force, so the pressure load effect is better.
Suitable Model: TRAXXAS-1/8 4WD SLEDGE MONSTER TRUCK-95076-4
[Leider liegt uns für dieses Produkt nur eine englische Beschreibung vor.]
Verpackung beinhaltet: Dämpfer-2St
Originalname/Teilenummer: 9661
Position des Teils: Dämpfer hinten
Ersetzt dieses Produkt ein bestimmtes Teil oder eine bestimmte Funktion? Ja
Hauptfunktionen und Verwendung des Produkts: Reduzieren Sie die Reibung und absorbieren Sie den Druck während der Fahrt, damit das Auto ausgeglichener ist.
Ist dieses Teil einstellbar? Wenn ja … wie und warum/Zweck? Wie: Stellen Sie die obere Federhalterung und die rote Schraube unten am Unterdruck-Ölzylinder ein. Zweck: Zum Einstellen der Härte des Federdämpfers.
Hauptvorteile des Upgrades auf dieses Produkt: (1). Hergestellt aus hochwertigem, leichtem, hochfestem Aluminium 6061-T6, leistungsstarker Einsatz, Federdrahtdurchmesser 2,0 mm entspricht dem Original. (2). Die Dämpferwelle wurde von 5,0 mm auf 6,0 mm verdickt und glatt poliert, um ein Verbiegen zu vermeiden. (3.) Aluminiumkörper mit stoßdämpfender Kappe, um dicht abzudichten und ein Auslaufen zu vermeiden. (4). Huckepack in L-Form mit eingebauter Kolbenfeder kann die Rückprallkraft einstellen, sodass der Druckbelastungseffekt besser ist.
Geeignetes Modell: TRAXXAS-1/8 4WD SLEDGE MONSTER TRUCK-95076-4
[Dieser Text wurde aus dem Englischen mit einem Programm übersetzt. Irrtümer und Übersetzungsfehler vorbehalten.]
Hersteller | GPM |
Maßstab | 1:8 |
Warnhinweise | ab 14 Jahre |
Hinweistext oben